Control panels supported by data interface:
• SECOLINK (control panels: PAS8xx, Pxx)
• DSC (control panels: PC5xx, PC5xxx, PC14xx, PC15xx, PC16xx, PC18xx)
• PARADOX (control panels: SP4xxx, SP6xxx, SP7xxx, EVOxxx, MG5xxx, SP5500+5, SP6000+5,6, SP7000+5)
Embedded-SIM (eSIM): Yes
User SIM: Yes
Extra services that are included in the final price of the product:
• paid 2-year mobile service plan2
• The GSV1 comes with 2 years of paid cloud services, allowing the user to take full advantage of the SECOLINK Pro app2.
Note: to activate extra services, it is necessary to create a user account in ALARMSERVER.NET cloud and register the product by entering product's identification number "BI".
Features of the communicator using user SIM card vs eSIM:
Number of recipients for SMS, voice clip messaging: 5
Number of recipients for internet messaging using app SECOLINK PRO: 10
Alarm message for end user by voice clip: No
Voice guide for end user: No
SMS out (device >> phone): No
SMS in (phone >> device): Yes
Remote system control using SECOLINK PRO app: Yes
SECOLINK PRO operation:
by internet: Yes
Push notifications: Yes
Reporting to Central Monitoring Station (CMS): Yes (There are additional conditions. Contact CMS company)
Reporting to CMS format: CID by GPRS/LTE Cat-M1
Reporting protocols for CMS: E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA
Compatible with SG-SYSTEM II , III IP card: Yes
General features
In-built wired zones (inputs) on board: 2
On-Board (open collector type) PGM: 1
Maximum current into PGM: -0,05 A
Power supply (DC): 9 - 14 V
Average current consumption: 25 mA
Maximum current consumption: 250 mA
Plastic casing: Yes
Overall dimensions W x D x H in mm: 115 x 65 x 18
Environmental compliance: ROHS
Operating temperature: From -10oC to +50oC
Interface with PC: Yes
Firmware update: USB - using software Firmware upgrade tool; Internet - using SECOLINK keypad menu or using button (release on 3rd blink), SMS command
2 - at the end of the paid period, the user will be offered to renew the license. The license is renewed upon purchase of a GSIM voucher. If the license is not
renewed the GSV1 will only be usable to report to the CMS receiver. The user has an option to insert his SIM card and continue to use GSV1 (additional

programming of GSV1 will be required). Before purchasing a GSV1, it is necessary to check whether the price of the extension (GSIM voucher) is acceptable. You can buy the voucher at https://shop.secolink.eu
3 - SMS messages from the communicator are not imported into the SECOLINK PRO app - they can be viewed using the SMS editing app on the phone.
Lock icons (ARMED / DISARMED) are not displayed in the app. SMS commands are not performed in the background - SECOLINK PRO will „insert“ the control command for the user into SMS editing app and the user will need to tap on the button Send.
4 - ALARMSERVER.NET cloud services should be in use.
5 - the SERIAL port must be unlocked before using the panel with the communicator (firmware version v.1.16 or higher). The SERIAL can be unlocked
for an additional fee. For more information, contact your local distributor or send an email to our support team: support@secolink.eu
6 - the update of the control panel firmware is required because the control panel with the stock version does not send all events to SERIAL port.